| Porduct Name | 120V Silicone Rubber Crankcase Heater for Air Condition |
| Material | silicone rubber |
| Voltage | 110V-240V |
| Power | customized |
| Belt width | 14mm or 20mm |
| Belt length | customized |
| Lead wire length | standard length is 1000mm,or customized |
| Terminal type | customized |
| Connector method | spring |
| Package | one heater with one bag |
|
Jingwei heater is a factory,more than 25 years on silicone rubber heater custom,our silicon crankcase heater width have 14mm or 20mm,most personal chooses the 14mm crankcase heating belt for compressor,if the belt power is too large,20mm belt width will be better.Because the too higher temperature will be accelerated the speed of silicone aging. *** Remark *** 1. The width of 2-core heating belt is 14mm, and the Max. Power is 100W/Meter 2. The width of 4-core heating belt is 20mm,25mm and 30mm, and the Max. Power is 150W/Meter |
|
The function of the silicone rubber crankcase heaters is eliminate start-ups with cold oil and increase the life time of the compressor.
Jingwei heater has a standard range of heaters for compressors and crankcases, e.g. for heat pumps both in a design with heating cable in an aluminum section, as well as silicon heater belt. We can also supply other lengths and wattages.
Withstands ambient temperatures from -50°C to 200°C. The heaters are supplied with a coil spring for attachment around the compressor crankcase.
If you have a special need regarding crank case heater of compressors, contact us for a custom made solution.
1. Bend and wind freely according to the needs of the heater, and the space occupation is small
2. Simple and fast installation
3. The heating body is covered with silicone insulator
4. Tin copper braid has the effect of preventing mechanical damage and can also conduct electricity to the ground
5. Avoid moisture completely
6. It can be made according to its required length
7. Core cold end
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
