Product Paramenters
| Porduct Name | 14mm Crankcase Heating Belt |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Material | silicone rubber |
| Width of belt | 14mm,20mm,25mm,etc. |
| Length of belt | Customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance in water | 750MOhm |
| Use | Crankcase heater belt |
| Lead wire length | 1000mm,or custom |
| Package | one heater with one bag |
| Approvals | CE |
| Terminal type | Customized |
|
The China crankcase heater width can be made 14mm,20mm,25mm,30mm,and so on.The silicone heating belt can be used for air-conditioner compressor or cooler fan cylinder defrosting.The crankcase heater belt length can be customized as client’s requirements. |
|
Product Configuration
Crankcase heaters are designed for quick, easy and safe use. The heater can be installed on a circular or elliptical refrigeration compressor unit. Crankcase heaters are used in the refrigeration industry and cold refrigeration systems. In order to ensure the long service life of these heating belts, we recommend the use of control devices. The Silicone rubber heater range is manufactured according to quality requirements, not only from a technical point of view, but also from the way our different departments work closely with each other and with our customers. The thermal, electrical, chemical and mechanical properties of our products are designed, validated and checked in our laboratories throughout the manufacturing process and then monitored during production for optimal safety and traceability.
Product Features
The lower the temperature, the quicker and the more complete the absorption, which can seriously damage the compressor, especially when starting up, through lack of lubrication.
1. Quick, safe and easy to fit.
2. Sealed, silicon-insulated heating element.
3. Length and belt width can be customized
4. 230 V as standard.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
