Product Paramenters
Porduct Name | Air Tubular Finned Strip Heater |
Humidity State Insulation Resistance | ≥200MΩ |
After Humid Heat Test Insulation Resistance | ≥30MΩ |
Humidity State Leakage Current | ≤0.1mA |
Surface Load | ≤3.5W/cm2 |
Tube diameter | 6.5mm,8.0mm,etc |
Shape | Straight,U shape,W shape,or customized |
Resistant voltage | 2,000V/min |
Insulated resistance | 750MOhm |
Use | Finned Heating Element |
Terminal | Rubber head,flange |
Length | Customized |
Approvals | CE, CQC |
The shape of Air Tubular Finned Strip Heater we usually made by straight,U shape,W shape,we can also customized some special shapes as required.Most customer's is choosed the tube head by flange,if you used the finned heating elements on unit cooler or other defrsoting equipments,maybe you can choosed the head seal by silicone rubber,this seal way has the best waterproof. |
Product Configuration
Air tubular finned strip heater elemnt is a metal heat sink wrapped around the surface of the original heating element, which expands the heat dissipation area by 2-3 times compared to ordinary elements, i.e. the surface power load allowed by the fin heat sink element is 3-4 times that of ordinary elements. As the length of the finned strip heater is shortened, the heat loss itself is reduced. Under the same power condition, it has the advantages of fast temperature rise, uniform heat generation, good heat dissipation performance, high thermal efficiency, long service life, small size of heating device and low cost.
Shape Choose
Product Applications
We can make special customization according to your requirements to facilitate your installation and use. The finned heating elements are widely used in the oven, oven heating, machinery manufacturing, automobile, textile, food, home appliances and other industries, especially in the air conditioner air curtain industry.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021,all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314