Product Paramenters
Porduct Name | Aluminum Defrost Tube Heating Element |
Humidity State Insulation Resistance | ≥200MΩ |
After Humid Heat Test Insulation Resistance | ≥30MΩ |
Humidity State Leakage Current | ≤0.1mA |
Surface Load | ≤3.5W/cm2 |
Tube diameter | 4.5mm,6.5mm,etc. |
Shape | customized |
Resistant voltage | 2,000V/min |
Insulated resistance | 750MOhm |
Use | Aluminum Defrost Heater |
Tube length | 300-7500mm |
Lead wire length | 700-1000mm (custom) |
Approvals | CE/ CQC |
Terminal type | Customized |
Jingwei heater is the Aluminum Defrost Tube Heating Element factory,the aluminum heating tube specification can be customized as client’s drawing or samples.At present, we have produced several aluminum defrost heater mainly exported to Egypt and other Middle Eastern countries, if you need to contact us. |
Product Configuration
Aluminum tube heating element is easier to use in narrow space, aluminum tube has good deformation capability, can be bent into complex shapes, is applicable to all kinds of space, in addition to tubes with heat conduction performance good, improve defrosting and heating effect.
The aluminum defrost heater is widely used to defrosting and heat preservation for refrigerator and freezer as well as other electrical equipment. It is with rapid speed on heat and with equality, security, through thermostat, power density, insulation material, temperature switch, heat scatter conditions can be required on temperature, mainly for frost elimination in refrigerator, frozen elimination and other power heat appliance.
Product Application
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021,all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314