Product Paramenters
| Porduct Name | Beer Brewing Heat Pad |
| Humidity State Insulation Resistance | ≥200MΩ |
| Power | 20-25W |
| Voltage | 110-230V |
| Material | PVC |
| Pad size | 30cm |
| Color | blue or black |
| Resistant voltage | 2,000V/min |
| Insulated resistance | 750MOhm |
| Use | home brew heater |
| Lead wire length | customized |
| Package | one heater with one bag |
| Approvals | CE |
| Plug | USA,Euro,UK,Australia,etc. |
|
The beer brewing heat pad diameter is 30cm,power is 25-30W.The plug can be choosed USA,UK,Euro,Australia,and so on. The home beer heater belt can be added the dimmer or temperator thermostat,someone is also added the temperature strip when using. |
|
Product Configuration
The brewing heat pad that can heat a fermenter/bucket. Just plug it in and stand the fermenter on top attach the temperature probe to the side of your fermenter and regulate the temperature using the thermostatic controller.
The brew Heating Mat is simply plugged in the mains and is placed on a floor or surface. The fermenters can then be placed on top of the heater. The heat will rise from the tray through the fermenter providing a gentle warmth to encourage successful fermentation. You can then attach the temperature probe and LCD thermometer strip to your fermenter, and monitor and regulate the temperature using the external thermostatic controller. This provides a gentle low power heat, so the liquid will not get over hot. This brewing heat pad is designed for the fermentation of wine, beer and cider.
Poly-bag
Card printed bag
Box
Instructions
1. Undo the ties on the power cord and the thermostatic probe and unwind the cables.
2. Plug the brewing heat pad into and electrical power supply and switch the power on.
3. Attach the probe to the outside surface of the fermenter with an elastic band or tape.
4. Press the top Power button on the controller to power the pad.
5. Use the up and down arrows to achieve the desired temperature in the display.
6. When the correct temperature is reached, press the SET button on the bottom of the controller – the display will flash three times to indicate the temperature has been set.
7. When the probe reaches the desired temperature, the brewing heating pad will turn off. If the temperature drops, the heating pad will power on again.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
