Product Paramenters
| Porduct Name | Cheap Heating Belt Crankcase Heater |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Material | silicone rubber |
| Width of belt | 14mm,20mm,25mm,etc. |
| Length of belt | Customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance in water | 750MOhm |
| Use | Crankcase heater belt |
| Lead wire length | 1000mm,or custom |
| Package | one heater with one bag |
| Approvals | CE |
| Terminal type | Customized |
|
The China crankcase heater width can be made 14mm,20mm,25mm,30mm,and so on.The silicone heating belt can be used for air-conditioner compressor or cooler fan cylinder defrosting.The crankcase heater belt length can be customized as client’s requirements. |
|
Product Configuration
Working environment temperature of designed air-conditioner compressor is about 4℃ while surround environment temperature is bellow zero. Air-conditioner is hard to make heater is necessarily used at end of central air-conditioner to make the supplementary heat. Our subsidiary electric heater series are the most suitable and ideal heating source designed and manufactured for this application. Moreover,our subsidiary heater series do not need any other subsidiary equipment. They have such many obvious advantages as being easy in installing,safe in operating and PTC electric heating element.
When the air-conditioner is used under severe cold condition,drive engine oil inside can condense,and affect the normal starting of the unit.The crankcase heating belt can promote to thermalize engine oil,and help the unit to be started normally.
It can protect compressor from being damaged in starting in cold winter,and prolongs the service life.(In cold winter,engine oil condenses,hard friction can generate in starting,and may cause damages of the compressor.)
Product Features
1. Corrosion resistant exterior
2. High temperature silicone rubber element and VW-1 insulated lead wires rated for 150°C
3. Custom leads and terminations available
4. Voltages through 600vac
5. Wattage for each model matches compressor requirements Completely moisture-proof
6. Quick and easy installation
7. Nominal power consumption due to highly efficient heat transmission and low wattage
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
