Product Configuration
Oven grill tubular heating element is a kind of dry burning heating tube, dry burning electric heating tube refers to the electric heating tube exposed in the air dry burning. The heating element inside the oven is a heating wire, and the middle is insulated with modified MgO powder and forced convection heating. The China oven heating element manufacturer main materials are stainless steel 304 and stainless steel 310S, which are highly resistant to steam corrosion and have a life of more than 5 years, and are the preferred material for embedded steam ovens. Long-term contact with water vapor is not easy to rust, it is recommended to choose stainless steel 310S, but the price is high.
The shape of the heating element of the oven grill also has an important impact on the baking effect. Common shapes are U-shaped, flat-shaped, and M-shaped. The center temperature of the U-shaped heating tube is low, it is easy to coke around, and the heating is the most uneven. Although the font heating tube is simple and easy to use, the more the better, because the single heating tube is generally uniform in heating. The M-type heating tube is more uniform in heat transfer, can better take into account the heating around and around the corner, and the baking effect is better.
Product Shape Choose
1. M-type tube
*** 360° three-dimensional heat dissipation, the best heat uniformity, especially suitable for baking bread, cake and other temperature-sensitive food ;
*** Compared with U-shaped tube (low center temperature) and one-shaped tube (insufficient coverage), baking color uniformity improved by 30%.
2. Straight pipe and multi-folded pipe (M or W shape)
*** Straight pipe needs multiple combinations (such as 3 above and below each) to make up for the coverage defect, the cost is low ;
*** Multi-folded pipe should be evenly distributed folding Angle, otherwise it may produce local high temperature .
Product Paramenters
Porduct Name | Oven Grill Tubular Heating Element |
Humidity State Insulation Resistance | ≥200MΩ |
After Humid Heat Test Insulation Resistance | ≥30MΩ |
Humidity State Leakage Current | ≤0.1mA |
Surface Load | ≤3.5W/cm2 |
Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
Shape | straight,U shape,W shape,etc. |
Resistant voltage | 2,000V/min |
Insulated resistance in water | 750MOhm |
Use | Oven Heating Element |
Tube length | 300-7500mm |
Shape | customized |
Approvals | CE/ CQC |
Terminal type | Customized |
The Oven Grill Tubular Heating Element is used for the microwave,stove,electric grill.Shape of the oven heater can be customized as client’s drawings or samples.The tube diameter can be choosed 6.5mm,8.0mm or 10.7mm. JINGWEI HEATER is the professional heating tube manufacturer,the voltage and power of oven heating element can be customized as required.And the oven heating element tube can be annealed,the tube color will be dark green after annealing.We have many kinds of the terminal models,if you need add the terminal,you need send us the model number first. |
Product Application

JINGWEI Workshop
Production Process

Service

Develop
received the products specs,drawing,and picture

Quotes
the manager feedback the inquiry in 1-2hours and send quotation

Samples
Free samples will be sent for check products quality before bluk production

Production
confirm products specification again,then arrange the production

Order
Place order once you confirmed samples

Testing
Our QC team will be checked the products quality before delivery

Packing
packing products as required

Loading
Loading ready productsto client’s container

Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021,all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate




Related Products
Factory Picture











Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314

