| Porduct Name | China Defrost Evaporator Heater Element |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
| Shape | straight,U shape,W shape,etc. |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Defrost Heating Element |
| Tube length | 300-7500mm |
| Lead wire length | 700-1000mm (custom) |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
JINGWEI heater is the professional defrost heating tube factory,we have more than 20 years on heater customized.The Defrost Evaporator Heater Element shape have single tube,double tube,U shape,W shape,and so on.The tube length can be customized as required. |
|
Defrost evaporator heater element is an electrical component specially designed for freezing equipment, is mainly used for defrosting by electric heating. The defrost heater tube has the advantages of simple structure, long life, high thermal efficiency, good mechanical strength, water resistance, corrosion resistance, easy installation, can be bent into various shapes and safety in use. Defrosting heating pipe is usually made of stainless steel as the outer pipe material. has good corrosion resistance and can adapt to the working environment of freezing equipment, , such as high indoor humidity, low temperature, frequent cold and hot shock and so on.
1. Structure and material: the defrost heater tube is composed of stainless steel tube into the spring-like resistance wire, and the gap part is closely filled with good thermal conductivity and insulation of crystalline magnesium oxide. pipe mouth is sealed by rubber vulcanization or double wall heat shrink pipe shrink, to improve the sealing property of products.
2. Product parameters: pipe diameter Φ6.5mm,Φ8.0mm, Φ10.7mm, voltage options 110v, 220v, 380V, power design per meter should be less than 700w. The product shape is usually single U and straight, special shape can be customized according to customer needs.
3. Use: defrost heating element is widely used in refrigerator, cold storage, water tank, solution tank, pool ( antifreeze) , aquaculture and other occasions. is especially suitable for defrosting on the fins of chiller, condenser and the chassis of water collecting pan. ensures the normal operation of the refrigeration equipment.
4. Advantages: good defrosting effect, stable electrical performance, high insulation resistance, corrosion resistance, strong overload capacity, small leakage current, stable and reliable, long service life.
Aluminum Foil Heater
Immersion Heater
Electric Heating Tube
Defrost Wire Heater
Silicone Heating Pad
Pipe Heat Belt
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
