Product Paramenters
| Porduct Name | China Door Heater Wire Heater for Freezer Frame |
| Insulation Material | Silicone rubber |
| Wire diameter | 2.5mm,3.0mm,4.0mm,etc. |
| Heating length | customized |
| Lead wire length | 1000mm,or custom |
| Color | white,grey,red,blue,etc. |
| MOQ | 100pcs |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | defrost heating wire |
| Certification | CE |
| Package | one heater with one bag |
|
The defrost door frame wire heater length,voltage and power can be customized as required.The wire diameter can be choosed 2.5mm,3.0mm,3.5mm,and 4.0mm.The wire surface can be braided firberglass,aluminum or stainless steel. The defrost wire heater heating part with lead wire connector can be seal with rubber head or double-wall shrinkable tube,you can choose according to your own use needs. |
|
Fiberglass braid
Stainless/Aluminum Braid
PVC Heater Wire
Silicone Heating Wire
Product Configuration
The Door Heater Wire Heater is composed of three parts: metal braid layer, insulation outer layer and wire core. The metal braided layer material has three kinds of glass fiber, stainless steel, aluminum, the insulation layer is made of silicone rubber, silicone rubber is soft, good insulation, and high temperature and low temperature resistance, high temperature resistance up to 400 degrees can still be used normally, and the softness is unchanged, uniform heat dissipation, so the silicone heat application range is very wide.
Product Function
Cold storage door frame heating wire is to prevent cold storage door frame due to icing or rapid cooling caused by poor sealing and insulation measures set. Its working principle is mainly to heat the air around the door frame by heating the hot wire to achieve the effect of controlling the temperature. The setting of the heating wire of the cold storage door frame can effectively improve the thermal insulation performance of the cold storage and ensure the quality and storage effect of the stored items.
Factory Picture
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater
Oven Heating Element
Aluminum Tube Heater
Aluminum Foil Heater
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
