Product Paramenters
| Porduct Name | Fermentation Home Brew Heating Belt |
| Humidity State Insulation Resistance | ≥200MΩ |
| Power | 20-25W |
| Voltage | 110-230V |
| Material | silicone rubber |
| Width of belt | 14mm and 20mm |
| Length of belt | 900mm |
| Resistant voltage | 2,000V/min |
| Insulated resistance in water | 750MOhm |
| Use | home brew heater |
| Lead wire length | 1900mm |
| Package | one heater with one bag |
| Approvals | CE |
| Plug | USA,Euro,UK,Australia,etc. |
|
The home brew heating belt width have 14mm and 20mm,the length of the belt is 900mm,power line length is 1900mm.The plug can be choosed USA,UK,Euro,Australia,and so on. The home beer heater belt can be added the dimmer or temperator thermostat,someone is also added the temperature strip when using. |
|
Product Configuration
The fermentation brew belt heater can be used to heat your homebrew to the correct temperature when room temperature it too cold.Simply wrap the brew belt around your brewing bucket or demijohn and plug it in.This universal fitting brew belt can be used on many different sized fermentation vessels.
These are ideal for the winter months when it may get colder in the house.
The brew belt heats at a constant temperature and uses approx 25 watts. Use in conjunction with a thermometer.
If it is particularly cold, put the brew belt near the bottom of the fermenter (approx 5-10 cm from the bottom). If your fermenting wine or beer only needs a little extra boost of heat, then put it 5-10cm below the top of the fermenting liquid. You may have to experiment with the belts position on your fermenter to get it at the right temperature. Always start off at the top and gradually lower the belt over the course of 24 hours until you reach the desired fermenting temperature.
Simply put the brew belt around the bottom of the vessel to heat up the brew to correct temperature.
Home brew heater width of 14mm and 20mm, suitable for a variety of brewing containers; Similarly, the heating belt is 900mm in length and the cord is 1900mm in length and is suitable for 7 to 8 gallon plastic fermenters or 6 gallon plastic fermenters.
The package of the home brew beer heater can be packed in transparent bag, printed card bag or box.There is MOQ of the printed card bag ( 500pcs) and box (500pcs),standard package is one heater with one transparent poly bag.
Poly-bag
Card printed bag
Box
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
