| Porduct Name | China Manufacturer Air Finned Tubular Heater Elements |
| Tube diameter | 6.5mm,8.0mm,9.0mm,10.7mm,etc. |
| Tube material | Stainless steel 304 |
| Fin size | 3.0mm,or customized |
| Fin material | stainless steel 304 |
| Shape | straight,U shape,W shape,or any special shape |
| Seal method | seal by rubber head or by flange |
| Size | customized |
| Voltage | 110V-380V |
| Use | Heating Element |
| Power | customized |
| Terminal type | customized |
| JINGWEI heater is a factory,mainly produce defrost heating tube,oven heating tube,finned heater and other heating elements.Besides,we also produce the aluminum foil heater,aluminum tube heater,aluminum heating plate and silicone rubber heating (heating pad,crankcase heater,drain line heater and heating wire),etc.Because we are the manufacturer,so we can be customized the heating elements according to client's requirements,you just send us the size and drawing or real samples,we can be quoted and free sample is avaliable. | |
The winding finned electric heating tube is a steel strip with a uniform winding width of 6 and 7mm on a smooth stainless steel heating tube with special equipment. The thickness of such a winding finned electric heating tube is pipe diameter + steel strip *2. Compared with the ordinary element, the heat dissipation area is expanded by 2 to 3 times, that is, the surface power load allowed by the fin element is 3 to 4 times that of the ordinary element. Due to the shortening of the length of the component, the heat loss of itself is reduced, and it has the advantages of fast heating, uniform heating, good heat dissipation performance, high thermal efficiency, long service life, small size of the heating device and low cost under the same power conditions.
The gap between the fins of the winding electric heating tube is 3-5mm,
The fin air heating tube has lower cost and high cost performance, and most customers choose this type.Electric finned air heater is based on the original dry burning electric heating tube with iron or stainless steel sheet, the purpose of doing so is to increase the heat dissipation area of the dry burning electric heating tube so as to accelerate the heat dissipation speed of the dry burning electric heating tube, and then ensure the service life of the dry burning electric heating tube. This is the advantage of a dry fired electric heating tube with fins.
It is widely used in industry, workshop, breeding, planting vegetables (flowers), drying food and so on. Water, steam, thermal oil, etc., can be used as heat medium.
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
