| Porduct Name | Cold Room Drain Line Heaters for Freezer |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Size | 5*7mm |
| Material | silicone rubber |
| Length | 0.5M-20M |
| Lead wire length |
1000mm |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Drain line heater |
| Terminal | customized |
| Package | one heater with one bag |
| Approvals | CE |
|
The drain line heater power will be made 40W/M or 50W/M,can also be customized other power of the drain heater.The lead wire length is 1000mm by default,1500mm or 2000mm can be customized. The heating wire with lead wire connected part is seal with by rubber,this will is a good waterproof function and can be used for defrosting.If the insulation layer is damaged,the best can be changed a new drain pipe heater to replace. |
|
Package Picture
The air cooler's blade will eventually freeze after it has been operating for a while. At that point, the melted water can be released from the refrigerator through the drain pipe by using the antifreezing heating wire.
Defrosted water freezes below 0°C when the drain pipe's front end is inserted in the refrigerator, blocking the drain pipe. Heating wire must be installed to prevent defrosted water from freezing in the drain pipe. To allow water to exit smoothly, a heating wire is inserted in the drain pipe to both heat and defrost the pipe simultaneously.
1. Complete water-proof design
2. Double-layer insulator
3. Mould pressing knot, flexibility
4. Silicon rubber insulator applicable scope: -60°C to +200°C
Defrost Heater Element
Aluminum Foil Heater
Defrost Wire Heater
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
