Product Configuration
The compressor crankcase heater is a key component in a wind-cooled heat pump module unit, whose main function is to prevent condensate from freezing in the crankcase at low temperatures. During the operation of the heat pump system, the refrigerant in the condenser will be compressed by the compressor, producing high-pressure and high-temperature gas.
These hot gases release heat through a heat exchanger, cool down, and condense into high-pressure liquid, while the surface temperature of the condenser often drops below the ambient temperature, causing water vapor in the air to condense into water.
When water vapor condenses into water, the crankcase may accumulate condensate water, especially in low temperature environments. If these droplets of water are not promptly drained or evaporated, they may freeze in the crankcase and form ice, which will have a negative impact on the normal operation of the unit, such as increasing the vibration and noise of the unit, lowering the efficiency of the unit, and even potentially causing a unit malfunction.
Product Function
The purpose of the compressor crankcase heater is to prevent ice formation in low temperature environments by heating the air inside the crankcase and raising the air temperature. The crankcase heater belt is usually composed of heating elements and can heat up by passing current through it and transfer heat to the air inside the crankcase. By heating the crankcase, the heating band can raise the internal temperature of the crankcase and keep condensate in the liquid state, thus preventing the formation of ice.
The presence of a crankcase heater band is very important for the operation of a wind-cooled heat pump module unit. It can effectively prevent condensate from freezing in the crankcase, maintain the normal operation of the unit, and improve its stability and efficiency. By using a compressor crankcase heater, you can reduce the rate of system failures, extend the life of the unit, and provide more reliable heating, cooling, and air conditioning services.
Product Paramenters
1. Material: silicone rubber
2. Width of belt: 14mm,20mm,25mm,etc.
3. Blet length: customized
4. Voltage: 110-230V
5. Power; customized
6. Lead wire length: 1000mm,or custom
7. Package: one crankcase heater with one bag
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
