Product Paramenters
| Porduct Name | Cooler Unit Defrost Heating Tube |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
| Shape | straight,U shape,W shape,etc. |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Defrost Heating Element |
| Tube length | 300-7500mm |
| Lead wire length | 700-1000mm (custom) |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
The Cooler Unit Defrost Heating Tube is used for the air cooler defrosting,picture shape of defrost heating tube is A-A type (double straight tube ),tube length custom is following your air-cooler size,our all defrost heater can be customized as required. The stainless steel defrost heating tube tube diameter can be made 6.5mm or 8.0mm,the tube with lead wire part will be sealed by rubber head.And the shape can also be made U shape and L shape.Power of defrost heating tube will be produced 300-400W per meter. |
|
Product Configuration
The cooler unit defrost heaters use consolidated and established technologies utilizing a spiral of resistive wire immersed in MgO compressed and protected by a metallic sheath.Defrost tubular heating elements after annealing can be shaped to many geometries depending on the heating needs and foot print available.After the shrink of the pipe, the two terminals take the special made rubber pressing sealing to make the electrical defrost heating pipe can be used normally in the cooling equipment and also it can be made into any shapes in according to the requirements of the users.
Defrost Heater for Air-cooler Model
Product Advantages
Cold room defrost heater has the following advantages:
1. Efficient defrost ability: defrost heater element can quickly melt the frost attached to the heat exchanger, improve the defrost efficiency.
2. Good reliability: defrost heater tube has a long service life and stable performance, sustainable use.
3. High efficiency: defrost heater tube has the characteristics of high efficiency and energy saving, which can improve the energy utilization rate.
4. High safety: defrost heater adopts safe materials and structure design, which has a high degree of safety.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Immersion Heater
Oven Heating Element
Defrost Wire Heater
Drain Line Heater
Pipe Heat Belt
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
