Product Paramenters
Porduct Name | Crankcase Heater for HVAC/R Compressors |
Humidity State Insulation Resistance | ≥200MΩ |
After Humid Heat Test Insulation Resistance | ≥30MΩ |
Humidity State Leakage Current | ≤0.1mA |
Material | silicone rubber |
Width of belt | 14mm,20mm,25mm,etc. |
Length of belt | Customized |
Resistant voltage | 2,000V/min |
Insulated resistance in water | 750MOhm |
Use | Crankcase heater belt |
Lead wire length | 1000mm,or custom |
Package | one heater with one bag |
Approvals | CE |
Terminal type | Customized |
The Crankcase Heater for HVAC/R Compressors width can be made 14mm,20mm,25mm,30mm,and so on.The silicone heating belt can be used for air-conditioner compressor or cooler fan cylinder defrosting.The crankcase heater belt length can be customized as client’s requirements. |
Product Configuration
The crankcase Heater is an electric resistance heater that is strapped or clamped to the bottom of a crankcase.The crankcase heater works to keep the oil in the compressor higher than the coldest part of the system.These silicone crankcase heaters are typically used on compressors that operate in ambient temperatures lower than the systems operating temperatures. Ideal for both residential and commercial applications and can be added to existing systems that do not already have heaters installed internally.
Ordering steps:
1. Measure the circumference or diameter of your crankcase or compressor
2. Determine the voltage and wattage
3. Select crankcase heater based on those parameters
Product Features
1. Band-style is flexible and easy to install
2. Rapid heat-up
3. Moisture proof and corrosion resistant
4. Grounded for safety
5. OEM replacement
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021,all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314