Product Paramenters
| Porduct Name | Custom Finned Tubular Heating Element |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,etc |
| Shape | Straight,U shape,W shape,or customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance | 750MOhm |
| Use | Finned Heating Element |
| Terminal | Rubber head,flange |
| Length | Customized |
| Approvals | CE, CQC |
| The shape of tubular finned heating element we usually made by straight,U shape,W shape,we can also customized some special shapes as required.Most customer's is choosed the tube head by flange,if you used the finned heating elements on unit cooler or other defrsoting equipments,maybe you can choosed the head seal by silicone rubber,this seal way has the best waterproof. | |
Product Configuration
Finned tubular heating element adopts mechanical winding, and the contact surface between the radiating fin and the radiating pipe is large and tight, to guarantee the good and stable performance of heat transfer. The air passing resistance is small, steam or hot water flows through the steel pipe, and the heat is transmitted to the air passing through the fins through the fins tightly wound on the steel pipe to achieve the effect of heating and cooling the air.
Shape Choose
Straight
U shape
W shape
Product Applications
Finned tube heater element is mainly used for air heating in the drying system and is the main equipment in the hot air device. The heat medium used in the radiator can be steam or hot water, or heat transfer oil. The working pressure of the steam is generally not more than 0.8Mpa , the temperature of the hot air is below 170°C.
1. Tubular finned heating elements are used for air heater, such as air duct heaters,space heater, oven, dehydrator, etc.
2. Heavy wall stainless steel tubular finned heating elements provide protection against corrosive air environments .
3. Custom the size, sheath material, watt,voltage, according to applications.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater Element
Immersion Heater
Oven Heating Element
Aluminum Foil Heater
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
