Product Paramenters
| Porduct Name | Customized Unit Cooler Heating Element for Defrost |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
| Shape | straight,U shape,W shape,etc. |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Defrost Heating Element |
| Tube length | 300-7500mm |
| Lead wire length | 700-1000mm (custom) |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
The Customized Unit Cooler Heating Element is used for the air cooler defrosting,picture shape of defrost heating tube is A-A type (double straight tube ),tube length custom is following your air-cooler size,our all defrost heater can be customized as required. The stainless steel defrost heating tube for air cooler tube diameter can be made 6.5mm or 8.0mm,the tube with lead wire part will be sealed by rubber head.And the shape can also be made U shape and L shape.Power of defrost heating tube will be produced 300-400W per meter. |
|
Product Configuration
Due to the frost on the surface of the evaporator in the cold storage, it prevents the conduction and dissemination of the cold capacity of the refrigeration evaporator (pipeline), and ultimately affects the refrigeration effect. When the thickness of the frost layer (ice) on the surface of the evaporator reaches a certain extent, the refrigeration efficiency even drops to less than 30%, resulting in a large waste of electric energy and shortening the service life of the refrigeration system. Therefore, it is necessary to carry out cold storage defrost operation in the appropriate cycle.
The Unit Cooler Heating Elements are employed in cold rooms and walk-in freezers to prevent ice buildup on the evaporator coils, maintaining a consistent temperature for bulk storage of perishable items.The defrost heater specs can be customized as requirements.
Defrost Heater for Air-cooler Model
Product Application
Unit cooler defrosting heater is mainly used in refrigerators, air conditioners, freezers, display cabinets, containers, the product for low temperature heating, two pipe mouth for pressure glue sealing treatment, can work in long-term low temperature and wet state, with anti-aging, long life and other characteristics.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Immersion Heater
Oven Heating Element
Defrost Wire Heater
Drain Line Heater
Pipe Heat Belt
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
