Product Paramenters
| Porduct Name | Defrost Aluminum Tube Heaters |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 4.5mm,6.5mm,etc. |
| Shape | customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance | 750MOhm |
| Use | Aluminum Defrost Heater |
| Tube length | 300-7500mm |
| Lead wire length | 700-1000mm (custom) |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
Jingwei heater is the aluminum defrost heater tube factory,the aluminum heating tube specification can be customized as client’s drawing or samples.At present, we have produced several aluminum defrost heater mainly exported to Egypt and other Middle Eastern countries, if you need to contact us. |
|
Product Configuration
The aluminum defrost heater for refrigerator is an electric heating element usually located near the evaporator coils. It is activated periodically to melt the accumulated frost and ice, allowing it to drain away as water. There are different types of defrost systems, but the basic principle involves temporarily raising the temperature in the freezer compartment to initiate the melting process.
It is typically controlled by a defrost timer, defrost thermostat, or an electronic control board. These components work together to ensure that the defrost cycle occurs at regular intervals, preventing excessive frost buildup. This helps maintain the efficiency of the refrigerator or freezer and ensures proper temperature control.
Product Application
1.Widely used for defrosting in refrigerators, deep freezers etc.
2.These defrost aluminum tube heaters can also be used in dry boxes, heaters and cookers and other middle temperature applications.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Immersion Heater
Defrost Heater
Defrost Wire Heater
Silicone Heating Pad
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
