Product Paramenters
| Porduct Name | Defrost Heater Tube for Water Collection Trays |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
| Shape | straight,U shape,W shape,etc. |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Defrost Heating Element |
| Tube length | 300-7500mm |
| Lead wire length | 700-1000mm (custom) |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
The Defrost Heater Tube for Water Collection Trays is used for the air cooler defrosting,picture shape of defrost heating tube is A-A type (double straight tube ),tube length custom is following your air-cooler size,our all defrost heater can be customized as required. The stainless steel defrost heater tube diameter can be made 6.5mm or 8.0mm,the tube with lead wire part will be sealed by rubber head.And the shape can also be made U shape and L shape.Power of defrost heating tube will be produced 300-400W per meter. |
|
Product Configuration
Defrost heaters are made specifically to address the problem of subpar refrigeration performance brought on by challenging defrosting in different types of freezers and refrigerator cabinets. By avoiding frost accumulation on cooling coils and other parts, these heaters are essential for preserving the efficacy and efficiency of refrigeration systems. Defrost heaters are made of sturdy stainless steel tubing and can be bent into different shapes to suit particular uses, guaranteeing simple installation and top performance.
Defrost Heater for Air-cooler Model
Product Function
The main function of the defrost heater tube is to prevent the evaporator from freezing, thus improving the cooling effect of the refrigeration device and reducing energy consumption. In refrigeration devices such as cold storage cold air machines and refrigerated display cabinets, the evaporator surface is prone to frosting. Frost will make the flow channel narrower, reduce air volume, and even completely block the evaporator, seriously affecting air flow and causing a significant drop in cooling effect and an increase in electricity consumption. To solve this problem, the usual method is to use electric heat defrosting, using the defrost heating tube to heat the frost on the evaporator surface, making it melt, thus achieving the purpose of defrosting.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Immersion Heater
Oven Heating Element
Defrost Wire Heater
Drain Line Heater
Pipe Heat Belt
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
