-
242044113 Refrigerator Freezer Defrosting Heater Element
Refrigerator Defrost Heating Element; part number 242044113.
Designed to fit specific Electrolux manufactured refrigerator models including Crosley, Frigidaire, Gibson, Kelvinator. -
Refrigerator Assembly Part#218169802 Tubular Defrost Heater
The Tubular Defrost Heater assembly (part number 218169802) is for refrigerators.
Defrost heater assembly 218169802 melts frost from the evaporator fins during the automatic defrost cycle.
Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands. -
Refrigerator Defrost Heater Wholesale&Manufacturer
The Refrigerator Defrost Heater can be customized as customer’s requirement,the length we have from 380mm to 560mm,the longest length can also be customized.The volatge will be 110V-230V,the power is 345W or custom.
-
U Type Defrost Tubular Heater Factory and Manufacturer
Defrost tubular element is used on the evaporators and refrigerating system which will defrost finned bodies. They are extremely flexible and used as a practical solution thanks to its capacity to form to the shapes of the various types of evaporator.
-
Fridge Parts Stainless Steel 304 Defrost Tubular Heating Element
Defrost Tubular Heating Element details can be customized as clien’s requirement.The heater size ,shape,power and voltage all can be designed.JINGWEI heater is a factory,we don’t have any standard heater,if you have any doubts on the heating element’s problem,you can contact us anytime.
-
China Factory Cold Room Evaporator Heater Defrost Tube
cold room evaporator heater defrost is mainly used in evaporator heating and defrost, mainly used in white goods such as refrigerators and commercial refrigeration such as chiller, freezer display cabinets, kitchen refrigerators, refrigerated container units and so on. This kind of heating pipe is generally made of magnesium oxide as an insulating narrow body, stainless steel as a pipe, and protected by silicone rubber sealing die head. Can be designed according to customer requirements of different shape size voltage power.
-
Factory Supply Defrost Heating Element for Freezer
The defrosting heating element tube diameter is usually 6.5mm or 8.0mm. Voltage and power as well as dimensions are determined by the customer. Defrost heater shapes are usually single U shape and straight shape. Special shapes can be customized.
Defrosting electric heat tube is mainly used in refrigerators, freezers, evaporators and other products. The tube mouth is sealed by rubber or double-wall heat shrink tube, which greatly improves the tightness of the product in cold and wet working environment.
-
Stainless Steel Refrigerator Defrost Heater For Evaporator
The Refrigerator Defrost Heater For Evaporator shape and length can be customized following customer’s requirement,shape can be made by straing,U shape,M shape or AA type; The lead wire and heating tube connector sealed by silicone rubber, have the good waterproof.
-
Stainless Steel Defrost Heater for Fridge
Refrigerator defrost heater parts
1. Material: SS304
2. Tube diameter； 6.5mm
3. Length: 10inch,12inch, 15inch,etc.
4. Voltage: 110V .220V,or customized
5.Power: customized
6. lead wire length : 150-250mm
-
Defrost Heater for Refrigerated Container
Defrosting of the cooler Refrigerators, freezers, evaporators, unit coolers, condensers, etc. all employ heating tubes.
A spiral of resistive wire squeezed and covered by a metallic sheath, immersed in MgO, is used in tubular heating elements, which employ well-established and consolidated technology. Depending on the required level of heating and the available footprint, tubular heating elements can be molded into a variety of geometries after annealing.
After the pipe has shrunk, the two terminals accept a specially produced rubber pressing sealing, allowing the electrical heating pipe to be used normally in cooling equipment and to be shaped anyway the customers choose.
-
Industrial Electrical Heater heating tube
Refrigerator, freezer, evaporator, unit cooler, and condenser all use defrost heaters for air coolers.
Aluminum, Incoloy840, 800, stainless steel 304, 321, and 310S are the materials used to make tubes.
Tubes range in diameter from 6.5 mm to 8 mm, 8.5 mm to 9 mm, 10 mm to 11 mm, 12 mm to 16 mm, and so forth.
Temperature range: -60°C to +125°C
16,00V/ 5S high voltage in test
Connection end firmness: 50N
Neoprene that has been heated and molded.
Any length is possible to make
-
Cooler Unit Defrost Heating Tube
Shrinkage of the tube is used in the production of heating tubes, which are then processed into the various shapes needed by the user. The gap between the electric heating wire and the seamless metal tubes that make up the heating tubes is filled with a magnesium oxide powder that has good thermal insulation and conductivity. We produce a range of heating tubes, including immersion heaters, cartridge heaters, industrial heating tubes, and more. We guarantee the quality of our products because they have received the required certifications.
Heating tubes have a small footprint, great power, a straightforward structure, and outstanding resilience to harsh environments. They can be used for a variety of purposes and are quite versatile. They can be utilized in situations where explosion-proof and other conditions are required, and they can be used to heat a range of liquids.
