Product Paramenters
| Porduct Name | Die Casting Aluminum Heater Heat Plate 380*380MM |
| Heating Part | Electric heating tube |
| Voltage | 110V-230V |
| Power | Customized |
| One sets | Top heating plate+base bottom |
| Teflon Coating | Can be added |
| Size | 290*380mm,380*380mm,etc. |
| MOQ | 10 sets |
| Package | Packed in wooden case or pallet |
| Use | Aluminum heating plate |
|
The Aluminum Heating Plate for Heat Press Machine size as below: 100*100mm,200*200mm,290*380mm380*380mm,400*500mm,400*600mm,500*600mm,600*800mm,etc. We also have large size aluminum heat press plate,such as 1000*1200mm,1000*1500mm,and so on.These aluminum hot plates we have have the molds and if you need to be customized molds,pls send us the aluminum heating plate drawings (the mold fee need pay by yourself.) |
|
400*500mm
400*600mm
400*400mm
Product Configuration
The casting or drilling holes in the cast aluminum heating plate need to use metal heating tubes, stainless steel heating tubes and iron heating tubes, and the surface is not charged. The cast aluminum heating plate is normally used below 380 ° C, and the aluminum plate will be deformed or even melted for a long time at temperatures above 400 ° C or even higher. The surface temperature uniformity of the die-casting aluminum heater plate is related to the layout of the tube, the flatness of the surface of the heating plate and the heating uniformity of the heating tube.
Features
The heating material of the casting aluminum heater is a metal heating tube, and its working principle is very simple, which is the basic electric heating effect. Its main advantages:
1. the cast aluminum heating plate is mostly flat and thin shape design simple structure, uniform heat dissipation, easy to install and use.
2, the aluminum heating plate is made of stainless steel, cast aluminum heater Jun porcelain and other materials as the outer shell, the electric thermal alloy wire is closed inside the electric heating plate, so it is closed heating, no open flame when heating, no odor, good safety, suitable for various working environments.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater Element
Aluminum Foil Heater
Silicone Heating Pad
Crankcase Heater
Finned Heat Element
Drain Pipe Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
