Product Paramenters
| Porduct Name | Drain Pipeline Heating Belt |
| Material | Silicone rubber |
| Size | 5*7mm |
| Heating length | 0.5M-20M |
| Lead wire length | 1000mm,or custom |
| Color | white,grey,red,blue,etc. |
| MOQ | 100pcs |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Drain pipe heater |
| Certification | CE |
| Package | one heater with one bag |
|
The power of drain pipeline heating belt is 40W/M,we can also be made other powers,such as 20W/M,50W/M,etc.And the length of drain pipe heater have 0.5M,1M,2M,3M,4M,etc.The longest can be made 20M. The package of drain line heater is one heater with one transplant bag,customized bag quantity at list more than 500pcs for each length. |
|
Product Configuration
Drain pipeline heating belt waterproof performance is good, can be used for wet, non-explosive gas sites industrial equipment or laboratory pipeline, tank and tank heating, heating and insulation, can be directly wound on the surface of the heated part, simple installation, safe and reliable. Suitable for cold areas, the main function of pipeline and solar special silicone rubber electric heating belt is hot water pipe insulation, thawing, snow and ice. It has the characteristics of high temperature resistance, high cold resistance and aging resistance.
Product Features
The pipeline heating belt is a particularly soft fixed-length heating belt with high design power density, so in addition to being used for general constant power belt heat tracing and insulation, it can also be used in places that require heating in some cases.
The use of drain pipeline heating belt precautions
(1) When installing, the silicone rubber plane side of the electric heating belt of the pipeline should be close to the surface of the medium pipeline and the tank, and fixed with aluminum tape.
(2) In order to reduce heat loss, the insulation layer should be tested outside the electric heating belt of the pipeline.
(3) The drain pipeline heating belt is strictly prohibited from overlapping and winding installation to prevent overheating damage.
Factory Picture
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater
Oven Heating Element
Aluminum Tube Heater
Aluminum Foil Heater
Crankcase Heater
Defrost Wire Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
