Porduct Name | Electric Tubular Water Immersion Heater |
Humidity State Insulation Resistance | ≥200MΩ |
After Humid Heat Test Insulation Resistance | ≥30MΩ |
Humidity State Leakage Current | ≤0.1mA |
Surface Load | ≤3.5W/cm2 |
Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
Shape | straight,U shape,W shape,etc. |
Resistant voltage | 2,000V/min |
Insulated resistance in water | 750MOhm |
Use | Immersion Heating Element |
Tube length | 300-7500mm |
Shape | customized |
Approvals | CE/ CQC |
Terminal type | Customized |
The Tubular Water Immersion Heater material we have stainless steel 201 and stainless steel 304,the flange size have DN40 and DN50,power and tube length can be custoized as requirements. |
The immersion heating tube is filled with electric heating wire in the stainless steel tube, and the void part is filled with magnesium oxide powder with good thermal conductivity and insulation, and then the tube is made of various shapes required by the user. It has simple structure, high thermal efficiency, good mechanical strength, and good adaptability to harsh environments. The electric heating tube can be used for heating various liquids, suitable for heating air, oil, water and so on. It has the characteristics of high thermal efficiency, long service life, high mechanical strength, easy installation, safety and reliability.
The tubular heating element can be divided into: straight single-ended heating tube, straight double-ended heating tube, U-shaped heating tube, W-shaped heating tube, special-shaped heating tube, spiral heating tube and so on. Can be customized!
![flange immersion heater](http://www.jingweiheat.com/uploads/flange-immersion-heater2.jpg)
![flange immersion heater](http://www.jingweiheat.com/uploads/flange-immersion-heater52.jpg)
Electric immersion heating tube is a special electrical component that converts electrical energy into heat energy. Because of its cheap price, easy to use, easy to install and no pollution, it is widely used in various heating occasions.
1. The electric heat pipe is small in size and large in power: the heater mainly uses cluster tubular electric heating elements.
2. Fast thermal response, high temperature control accuracy, high comprehensive thermal efficiency.
3. High heating temperature: the maximum task temperature of the heater design can reach 850℃, the medium outlet temperature is average, and the temperature control precision is high.
4. Wide use limits, strong compliance: the heater can be used for explosion-proof or popular places, explosion-proof grade up to dIB and C, pressure up to 20MPa,
5. Long life and high reliability: the heater is made of extraordinary electric heating data, the design appearance power load is low, and the use of multiple maintenance, so that the safety and life of the electric heater are greatly added.
6. Can be fully active control: according to the requirements of the heater circuit design, can facilitate the completion of exit temperature, meteor, pressure and other parameters of the active control, and can be networked with the computer. The result of energy saving is obvious, and almost 100% of the heat generated by electric energy is transferred to the heating medium.
![oil fryer heating element](http://www.jingweiheat.com/uploads/Oven-heating-element_07.jpg)
![1 (2)](http://www.jingweiheat.com/uploads/1-2.png)
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
![0ab74202e8605e682136a82c52963b6](http://www.jingweiheat.com/uploads/0ab74202e8605e682136a82c52963b6.jpg)