-
High quality finned tubular Heating element Heater Tube
Heating tube is a metal tube for the shell, along the tube center axially evenly distributed spiral electric heating alloy wire (nickel-chromium, iron-chromium alloy) gap filling compacted with good insulation and thermal conductivity of magnesium oxide sand, the two ends of the tube mouth with silicone or ceramic seal.
-
China Factory Stainless Steel Air Fnned Heater
The stainless steel fin electric heating tube is wound metal heat sink on the surface of the ordinary element, and the heat dissipation area is expanded by 2 to 3 times compared with the ordinary element, that is, the surface power load allowed by the fin element is 3 to 4 times that of the ordinary element. Due to the shortening of the length of the component, the heat loss of itself is reduced, and under the same power conditions, it has the advantages of fast heating, uniform heating, good heat dissipation performance, high thermal efficiency, long service life, small size of the heating device and low cost. According to the requirements of users, the reasonable design is easy to install.
-
Electric Finned Tube Heater for Industry
Electric Finned Tube Heater is a stainless steel heat sink wrapped on the surface of the heating element, and the heat dissipation area is expanded by 2 to 3 times compared with other ordinary heating tube, that is, the surface power load allowed by the finned element is 3 to 4 times that of the ordinary heating element. Due to the shortening of the length of the component, the heat loss of itself is reduced, and under the same power conditions, it has the advantages of fast heating, uniform heating, good heat dissipation performance, high thermal efficiency, long service life, small size of the heating device and low cost.
-
Stainless Steel Finned Air Element Heating Tube
Finned Air Element Heating Tube is mainly suitable for air heating, due to the tube with fins, can carry out effective heat dissipation.Heating tube can be customized according to customers to have different shapes, different lengths.
-
Industry Heating Parts Finned Tubular Heater
For use in applications requiring convection heating;
Finned tube heater Shape and size can be customized;
Finned design optimizes heat dissipation.
-
WUI Type Industrial electric resistance air finned tube
The finned heaters have been developed to satisfy the need of temperature controlled air or gas flows which is present in several industrial processes. They are also suitable to keep a closed ambient at a specified temperature. The are designed to be inserted into ventilation ducts or air conditioning plants and are directly flown by the process air or gas. They can also be installed directly inside the ambient to be heated since they are suitable to heat static air or gases.
Finned Tube Heater Heating Element is made of high quality stainless steel, modified magnesium oxide powder, high electric resistance heat sealing material such as stainless steel radiator. To improve heat transfer to the air and permits putting more power in tighter spaces, like forced air ducts, dryers ,ovens and load bank resistors. Heat transfer, lower sheath temperature and element life are all maximized by the heater’s finned construction.
-
Finned air heating element heating tube for oven and stove
For direct immersion in liquids such as water, oils, solvents and process solutions, molten materials, as well as air and gases, a fanned air heating element heating tube for oven and stove is custom manufactured in a variety of shapes to meet client requirements.
-
Electric Finned Heating Tube
1. Small volume, large power: the electric heater internal mainly using the cluster type tubular heating element, each cluster type tubular electric heating element maximum power up to 5000KW.
2. Fast thermal response, high precision temperature control, high comprehensive thermal efficiency.
3. Wide application range, strong adaptability: the circulating heater can be applied to explosion-proof or through occasions, its explosion-proof level can reach B and C level, its pressure resistance can reach 10Mpa, and can be installed vertically or horizontally according to user needs cylinder.
-
U-shaped W-shaped heater Heater tube with a fin
Description of Finned Tubular Heater :
Finned Tubular Heater are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, flange immersion heaters are ideal for applications requiring higher kilowatts.
Brazed or welded tubular parts are used to construct finned tubular heaters. The terminal enclosure on stock flange heaters serves as a general-purpose terminal enclosure.
The tubular components in a finned tubular heater also provide the high kilowatts needed for liquid immersion applications in tiny tanks. The tubular element is particularly well-suited for petroleum-based liquid heating applications because of its distinctive flat surface geometry, which allows for the packing of more power into a smaller bundle with a lower watt density.
-
Heater Finned Tubular heating tube
1. High-quality material selection and corrosion resistance
2. Long-term, high-quality usage of surface gloss as brand-new
3. It is quicker to treat heat conduction using a unique procedure.
4. Protect the environment, don’t discharge dangerous compounds, and use non-toxic, non-polluting products
5. High antioxidant power; no rust in humid conditions.
-
U type/W type heater Finned Tubular heating tube
1. High-quality material selection and corrosion resistance
2. Long-term, high-quality usage of surface gloss as brand-new
3. It is quicker to treat heat conduction using a unique procedure.
4. Protect the environment, don’t discharge dangerous compounds, and use non-toxic, non-polluting products
5. High antioxidant power; no rust in humid conditions.
