Product Configuration
In contrast to the common element, which is 2 to 3 times thevolume of the radius, the finned heating elements cover metal fins onthe surface of the common element. This significantly increases in contrast to the common element, which is 2 to 3 times thevolume of the radius, the finned air heaters cover metal fins onthe surface of the common element. This significantly increases.This implies that the surface electrical burden of the Fine element is three to four times that of the normal element.
Simultaneously, the temperature increases at a quicker rate, theheat increases at the same rate, the heat increases at a fasterrate, the heat efficiency increases, the duration of the year increases,and the temperature decreases.
Product Paramenters
| Porduct Name | Finned heating element |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,etc |
| Shape | Straight,U shape,W shape,or customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance | 750MOhm |
| Use | Finned Heating Element |
| Terminal | Rubber head,flange |
| Length | Customized |
| Approvals | CE, CQC |
| The shape of finned heating element we usually made by straight,U shape,W shape,we can also customized some special shapes as required.Most customer's is choosed the tube head by flange,if you used the finned heating elements on unit cooler or other defrsoting equipments,maybe you can choosed the head seal by silicone rubber,this seal way has the best waterproof. | |
Shape Choose
Straight
U shape
W shape
Product Applications
1. In the chemical industry, chemical heating, some powders that under a certain pressure, chemical process and drying through air heating are finished.
2. Heating hydrocarbon carbon, including biogas oil, heavy oil, fuel oil, hot change oil, lubricating oil and paraffin.
3. Because the finished electric heat pipe has an advanced structure to be affected by the explosion, the device can be widely used in explosion prediction areas, such as chemical, military, oil, natural gas, offshore placards, ships and the area.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater Element
Immersion Heater
Oven Heating Element
Aluminum Foil Heater
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
