Product Paramenters
| Porduct Name | Finned Tube Heater |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,etc |
| Shape | Straight,U shape,W shape,or customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance | 750MOhm |
| Use | Finned Heating Element |
| Terminal | Rubber head,flange |
| Length | Customized |
| Approvals | CE, CQC |
| The shape of Finned Tube Heater we usually made by straight,U shape,W shape,we can also customized some special shapes as required.Most customer's is choosed the tube head by flange,if you used the finned heating elements on unit cooler or other defrsoting equipments,maybe you can choosed the head seal by silicone rubber,this seal way has the best waterproof. | |
Product Configuration
The finned tube heater element is a metal heat sink that is wrapped around the original heating element's surface. This increases the heat dissipation area by two to three times when compared to regular elements; in other words, the fin heat sink element's surface power load is three to four times that of regular elements. The finned tube heater's actual heat loss decreases as its length is lowered. Fast temperature rise, uniform heat generation, good heat dissipation performance, high thermal efficiency, long service life, small size of heating device, and inexpensive cost are its advantages under the same power conditions.
Shape Choose
Straight
U shape
W shape
Product Applications
1. The process of heating and drying
Industrial ovens, drying tunnels, and heat treatment equipment are just a few of the many industries that use finned tube heaters for heating and drying operations. They are perfect for these applications because of their rapid and effective production of high temperatures.
2. The industries of chemicals and processing
Liquids, gasses, and storage tanks are heated using stainless steel finned heating elements in the chemical and industrial industries. They are frequently found in storage tanks, distillation towers, and chemical reactors. These finned heaters' accurate temperature control guarantees ideal process conditions and high-quality output.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater Element
Immersion Heater
Oven Heating Element
Aluminum Foil Heater
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
