| Porduct Name | Four-core Silicone Crankcase Heater |
| Material | silicone rubber |
| Belt width | 14mm,20mm,25mm,30mm,and so on. |
| Belt length | customized |
| Lead wire material | silicone rubber or fiberglass |
| Lead wire length | 1000mm(standard) |
| Belt type | Two core or Four core |
| Voltage | 110V,220V,or customized |
| Package | one heater with one bag |
| Parts | One heater with one spring |
|
Jingwei heater has more than 20 years on heater custom,our mainly products are defrost heating tube,oven heating tube,water heater,aluminum foil heater,silicone heating pad,crank case heater,drain line heater,aluminum heating plate and so on; 1. The silicone crankcase heater can be customized as customer's requirements,there is no standard;The belt length can be made folloing the crankcase's circumference,the length of the lead wire is 1000mm,someone is also need 2000mm or 2500mm,this one is no standard; 2.The crank case heater belt package is packed on the poly bag,and we'll also add a spring for installation,about 100-200pcs one carton. |
|
Drain Line Heater
Heating Wire
Aluminum Foil Heater
Silicone rubber heating belt waterproof performance is good, can be used for wet, non-explosive gas sites industrial equipment or laboratory pipeline, tank and tank heating, heating and insulation, can be directly wound on the surface of the heated part, simple installation, safe and reliable. Suitable for cold areas, the main function of pipeline and solar special silicone rubber electric heating belt is hot water pipe insulation, thawing, snow and ice. It has the characteristics of high temperature resistance, high cold resistance and aging resistance.
(1) non-alkali glass fiber core frame winding electric heating wire, the main insulation is silicone rubber, good heat resistance, reliable insulation performance.
(2) Has excellent flexibility, can be directly wound on the heating device, good contact, uniform heating.
(3) When installing, the silicone rubber plane side of the electric belt should be close to the surface of the medium pipeline and tank, and fixed with aluminum tape. In order to reduce heat loss, a thermal insulation layer should be measured outside the electric belt.
(4) According to the needs of the heater, it is bent and wound at will, the space is small, the installation method is simple and fast, the heating body is covered with silicone insulator, and the tin copper braid has the effect of preventing mechanical damage.
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
