Product Paramenters
Porduct Name | Freezer Room Door Heater Cable |
Insulation Material | Silicone rubber |
Wire diameter | 2.5mm,3.0mm,4.0mm,etc. |
Heating length | customized |
Lead wire length | 1000mm,or custom |
Color | white,grey,red,blue,etc. |
MOQ | 100pcs |
Resistant voltage in water | 2,000V/min (normal water temperature) |
Insulated resistance in water | 750MOhm |
Use | defrost heating wire |
Certification | CE |
Package | one heater with one bag |
The Freezer Room Door Heater Cable length,voltage and power can be customized as required.The wire diameter can be choosed 2.5mm,3.0mm,3.5mm,and 4.0mm.The wire surface can be braided firberglass,aluminum or stainless steel. The defrost wire heater heating part with lead wire connector can be seal with rubber head or double-wall shrinkable tube,you can choose according to your own use needs. |
Product Configuration
The role of the refrigerator freezer room door heater cable is mainly used to heat the door, prevent the refrigerator door frame from being frozen, resulting in the refrigerator door can not be opened. So if it is broken, it is best to repair or replace it. Because the refrigerator itself is a refrigeration body, the internal temperature is low, and in the case of high air humidity, the parts around the refrigerator box are condensed. When the door is opened, hot and cold gas convection, condensation around the door body, in order to avoid or slow down the wet areas and rainy season, the above situation, the household refrigerator in the refrigeration cycle to increase the anti-dew device, installed on both sides of the door and the middle part, the use of anti-dew pipe heat, reduce the temperature difference between the box and the outside environment, to reduce and eliminate condensation. Therefore, when the refrigerator is running, there is heat around the door. However, this freezer room door heater cable, whether uniform or uneven, has no effect on the life of the refrigerator shell.
Product Application
Factory Picture
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021,all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314