Product Paramenters
| Porduct Name | Freezer Room Door Heater |
| Insulation Material | Silicone rubber |
| Wire diameter | 2.5mm,3.0mm,4.0mm,etc. |
| Heating length | customized |
| Lead wire length | 1000mm,or custom |
| Color | white,grey,red,blue,etc. |
| MOQ | 100pcs |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | door frame deforst heater wire |
| Certification | CE |
| Package | one heater with one bag |
|
The Freezer Room Door Heater length,voltage and power can be customized as required.The wire diameter can be choosed 2.5mm,3.0mm,3.5mm,and 4.0mm.The wire surface can be braided firberglass,aluminum or stainless steel. The defrost wire heater heating part with lead wire connector can be seal with rubber head or double-wall shrinkable tube,you can choose according to your own use needs. |
|
Fiberglass braid
Stainless/Aluminum Braid
PVC Heater Wire
Silicone Heating Wire
Product Configuration
The heat generated by the Freezer room door heater heats the air around the door frame to achieve the effect of controlling the temperature. In general, the heating wire will generate a certain amount of heat through the current, raising the temperature around the door frame to a certain temperature, so as to achieve the purpose of controlling the temperature. Cold storage door frame heating wire is to prevent cold storage door frame due to icing or rapid cooling caused by poor sealing and insulation measures set.In order to prevent the cold storage door frame from freezing and rapid cooling resulting in poor sealing, a heating wire is usually added around the cold storage door frame.
Why use the freezer room door heater?
Because the temperature inside the cold storage is very low, and the cold storage outside is generally normal room temperature. This huge temperature difference can cause problems. When the cold storage door is closed, it is easy to condensate or frost around the cold storage door frame due to the temperature difference. This cold condensation and frost, if not treated, can be a problem. On the one hand, they will affect the tightness of the cold storage door, so that the thermal insulation effect of the cold storage is greatly reduced. On the other hand, a long time may also damage the structure of the door frame and door.
Factory Picture
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Defrost Heater
Oven Heating Element
Aluminum Tube Heater
Aluminum Foil Heater
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
