The working principle of the electric heating tube is that when there is a current in the high temperature resistance wire, the heat generated is transmitted to the surface of the stainless steel tube through the modified oxide powder, and then conducted to the heated part. This structure is not only advanced, high thermal efficiency, fast heating, and uniform heating, the product in the power heating, the tube surface insulation is not charged, safe and reliable use. We have more than 20 years of custom experience in stainless steel heating tubes, producing different kinds of electric heating tubes, such as defrost heating tubes , oven heating element, finned heating element, water immersion heating tubes, etc. Products are exported to the United States, South Korea, Japan, Iran, Poland, Czech Republic, Germany, Britain, France, Italy, Chile, Argentina and other countries. And has been CE, RoHS, ISO and other international certification. We provide perfect after-sales service and a quality guarantee of at least one year after delivery. We can provide you with the right solution for a win-win situation.
-
Stainless steel Toaster Oven Heating Tube Manufacturer
The structure of the electric oven heating tube is to put an electric heating wire in a stainless steel 304 tube, and the gap part is tightly filled with crystalline magnesium oxide with good thermal conductivity and insulation. The two ends of the electric heating wire are connected with the power supply through two leading rods. It has the advantages of simple structure, long life, high thermal efficiency, good mechanical strength, and can be bent into various shapes and safe use.
-
Factory Supply Defrost Heating Element for Freezer
The defrosting heating element tube diameter is usually 6.5mm or 8.0mm. Voltage and power as well as dimensions are determined by the customer. Defrost heater shapes are usually single U shape and straight shape. Special shapes can be customized.
Defrosting electric heat tube is mainly used in refrigerators, freezers, evaporators and other products. The tube mouth is sealed by rubber or double-wall heat shrink tube, which greatly improves the tightness of the product in cold and wet working environment.
-
U Shape Air Electric Tubular Heater
Electric tubular heater material is stainless steel (material can be changed according to customer requirements and use environment), the highest medium temperature of about 300℃. Suitable for a variety of air heating systems (channels), can be used as a variety of ovens, drying channels and electric furnace heating elements. Under special high temperature conditions, the tube body can be made of stainless steel 310S.
-
Electric Finned Tube Heater for Industry
Electric Finned Tube Heater is a stainless steel heat sink wrapped on the surface of the heating element, and the heat dissipation area is expanded by 2 to 3 times compared with other ordinary heating tube, that is, the surface power load allowed by the finned element is 3 to 4 times that of the ordinary heating element. Due to the shortening of the length of the component, the heat loss of itself is reduced, and under the same power conditions, it has the advantages of fast heating, uniform heating, good heat dissipation performance, high thermal efficiency, long service life, small size of the heating device and low cost.
-
Electric Stove Parts Tubular Heater for Oven
The Oven Bake Element is located at the bottom of the oven and emits heat when the oven is turned on. The tubular heater for oven can be customized as your requirement,the tube diameter we have 6.5mm and 8.0mm,shape and size can be designed.
-
Stainless Steel Refrigerator Defrost Heater For Evaporator
The Refrigerator Defrost Heater For Evaporator shape and length can be customized following customer’s requirement,shape can be made by straing,U shape,M shape or AA type; The lead wire and heating tube connector sealed by silicone rubber, have the good waterproof.
-
M shape Air Heater Tubular Heating Elements
Tubular Heating Elements can be customized according to customer’s requirements.Using the best MgO power and stainless steel 304 tube,shape, voltage power, size can be customized according to their own use needs.
-
Stainless Steel Finned Air Element Heating Tube
Finned Air Element Heating Tube is mainly suitable for air heating, due to the tube with fins, can carry out effective heat dissipation.Heating tube can be customized according to customers to have different shapes, different lengths.
-
Customized Electric Grill Oven Heating Element
Grill oven heating element is used for the microwave ovens,grill and other household appliances.The heater specs can be customized customer’s drawing and requirements.Use the industry’s top material suppliers and technicians with production experience.
-
Industry Heating Parts Finned Tubular Heater
For use in applications requiring convection heating;
Finned tube heater Shape and size can be customized;
Finned design optimizes heat dissipation.
-
Stainless Steel Defrost Heater for Fridge
Refrigerator defrost heater parts
1. Material: SS304
2. Tube diameter； 6.5mm
3. Length: 10inch,12inch, 15inch,etc.
4. Voltage: 110V .220V,or customized
5.Power: customized
6. lead wire length : 150-250mm
-
Defrost Heater for Refrigerated Container
Defrosting of the cooler Refrigerators, freezers, evaporators, unit coolers, condensers, etc. all employ heating tubes.
A spiral of resistive wire squeezed and covered by a metallic sheath, immersed in MgO, is used in tubular heating elements, which employ well-established and consolidated technology. Depending on the required level of heating and the available footprint, tubular heating elements can be molded into a variety of geometries after annealing.
After the pipe has shrunk, the two terminals accept a specially produced rubber pressing sealing, allowing the electrical heating pipe to be used normally in cooling equipment and to be shaped anyway the customers choose.