Product Paramenters
| Porduct Name | Mabe China Defrost Heater Element Resistance |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
| Shape | straight,U shape,W shape,etc. |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Defrost Heating Element |
| Tube length | 300-7500mm |
| Lead wire length | 700-1000mm (custom) |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
The Defrost Heater Element Resistance is used for the air cooler defrosting,picture shape of defrost heating tube is A-A type (double straight tube ),tube length custom is following your air-cooler size,our all defrost heater can be customized as required. The stainless steel defrost heating tube for air cooler tube diameter can be made 6.5mm or 8.0mm,the tube with lead wire part will be sealed by rubber head.And the shape can also be made U shape and L shape.Power of defrost heating tube will be produced 300-400W per meter. |
|
Product Configuration
The defrost heater element is actually stainless steel defrost heating tube composed of electric heating wires.During the operation of the refrigerator, the internal water will gradually condense into a thick layer of frost on the surface of the evaporator. The thermal conductivity of the frost is very poor, and it will significantly reduce the refrigeration efficiency of the refrigerator. Therefore, the refrigerator must defrost in time through defrost heater element.
Defrost Heater for Air-cooler Model
Product Features
1. High electrothermal conversion efficiency, saving about 30% energy compared with ordinary heating elements
2. High working temperature and wide selection range.Among them, the ceramic cap packaging type has a maximum temperature resistance of 800 ℃
3. Fast temperature rise, small thermal inertia, high temperature resistance, corrosion resistance, good stability of thermochemical properties, long service life and high insulation strength
4. It is a pollution-free and clean heater, which meets the requirements of modern production with high rhythm and high quality, and is suitable for all kinds of refrigeration appliances
5. Convenient installation, economical and safe
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heat Element
Electric Heating Tube
Defrost Wire Heater
Silicone Heating Pad
Pipe Heat Belt
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
