1. The oven heating tube is broken, turn off the oven power, use a screwdriver tool to open the shell from the back of the oven, one part is a phillips screw, the other part is a hex socket screw. Then we open the side of the oven and carefully remove the pipe nut, if there is no hex socket tool, then we can use needle-nose pliers or vise instead, the back of the nut is a gasket, we need to store carefully after removal, it is best to use a special box to store each screw removed, so as to avoid mistakes in the back installation.
2. At this time, we can see the original heating tube of the oven. At this time, take out the new heating tube prepared and install it on our oven. After the tubular oven heater is installed, use a multimeter to check the following cables and ensure that the screws are in order.
3. Take care of the removed old oven heating pipe and use it for backup next time. And often observe the situation of the pipe, if there is serious bending, it is best to replace a new oven.
4. It should be noted that because the oven is a relatively high technical content of electrical appliances, so if you can not judge the oven heating tube because of what reason can not work normally, at this time it is best to ask professional staff to come to the oven heating tube to repair.
Post time: Dec-19-2023