| Porduct Name | Refrigerator Defrost Heater Wholesale&Manufacturer |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Tube diameter | 6.5mm,8.0mm,10.7mm |
| Shape | Straight,U shape,W shape,AA type,or custom |
| Size | Customized |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Seal way | Rubber head or shrinkable tube |
| Use | Defrost Heating Element |
| Lead wire length | Standard 1000mm,or custom |
| Certification | CE/CQC |
|
Refrigerator Defrost Heater Wholesale&Manufacturer for commercial refrigeration equipment ,unit cooler,evaporator. May be clamped to pipes or tanks to promote drainage and prevent freezing. The defrost heating tubes are all customized as customer's requirement,we don't have standard ones.The defrost heater tube we have straight,U shape,W shape,A-A type or other special shape.The defrsoting heating tube diameter we have 6.5mm,8.0mm,10.7mm.And the defrosting heater is widely for using refrigerator,fridge,freeze,unit cooler,and other defrost refrigeration equipment.Besides we also produce other defrost parts,such as drain pipe heater,crank case heater,defrosting door frame heating wire and some defrost aluminum foil heater.We can be customized following your drawing or pictures or samples for custom. |
|
Drain Line Heater
Aluminum Foil Heater
Defrost Heating Wire
Due to freezing equipment work, high indoor humidity, low temperature, cold and hot shock often wait for a characteristic, on the basis of the tubular electric heating element, is made of high quality modified MgO powder for packing, stainless steel tube, after shrinkage tube, two terminal made of special rubber seal, can make the electric heating tube in refrigeration equipment in normal use. And can bend any shape according to user's need. It can be conveniently mounted on the ribs of the cooling fan, the condenser and the chassis of the water-collecting disc for defrosting.
Defrost Heaters can be clamped directly to evaporator coils and operated by time clock or manual defrost controls. Heaters can be formed into drain pans to prevent freezing of condensate. Molded terminals should be located above standing water.
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
