Product Paramenters
| Porduct Name | Silicone Rubber Crank Case Band Heater |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Material | silicone rubber |
| Width of belt | 14mm,20mm,25mm,etc. |
| Length of belt | Customized |
| Resistant voltage | 2,000V/min |
| Insulated resistance in water | 750MOhm |
| Use | Crankcase heater belt |
| Lead wire length | 1000mm,or custom |
| Package | one heater with one bag |
| Approvals | CE |
| Terminal type | Customized |
|
The China crankcase heater width can be made 14mm,20mm,25mm,30mm,and so on.The silicone heating belt can be used for air-conditioner compressor or cooler fan cylinder defrosting.The crankcase heater belt length can be customized as client’s requirements. |
|
Product Configuration
Compressor crankcase heating belt: The heating element is arranged nickel chromium alloy resistance wire, heating fast, uniform temperature, insulation layer using high and low temperature resistance, anti-corrosion, high insulation, aging resistance of silicone rubber and non-chemical fiber cloth, imported foam rubber and other materials, by lining, intermediate insulation layer, outer protective layer of three layers, good heat resistance, reliable insulation performance, flexibility, can be heated object close contact, High thermal efficiency, easy to use, can be directly wound on the surface of the heated part. In order to maintain the best performance of the equipment, the crankcase heater plays a vital role in reducing the accumulation of water and maintaining a consistent working temperature, thus improving the service life of the machine.
Product Features
1. Random bending and winding according to the demand of to-be-heated component, small occupied space and volume.
2. Simple and fast installation mode.
3. Sleeve silicon rubber insulator on heating body.
4. Tin copper braided layer can prevent machine from being damaged, and conduct electric power to the ground.
5. Moisture resistance entirely.
6. Customize according to the required length.
7. Core cold tail end.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Heating Wire
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
