Crankcase heater for compresor is suitable for all kinds of crankcase in the air conditioning and refrigeration industry, the main role of the compressor bottom heating belt is to prevent the compressor from producing liquid compression during start-up and operation, to avoid the mixture of refrigerant and frozen oil, when the temperature drops, the refrigerant will dissolve into the frozen oil more quickly, so that the gas refrigerant condenses in the pipeline and gathers in the liquid form in the crankcase, such as less than When excluded, can cause compressor lubrication failure, damage the crankcase and connecting rod. It is mainly installed at the bottom of the compressor of the outdoor unit of the central air conditioner.
Silicone rubber heating belt waterproof performance is good, can be used for wet, non-explosive gas sites industrial equipment or laboratory pipeline, tank and tank heating, heating and insulation, can be directly wound on the surface of the heated part, simple installation, safe and reliable. Suitable for cold areas, the main function of pipeline and solar special silicone rubber electric heating belt is hot water pipe insulation, thawing, snow and ice. It has the characteristics of high temperature resistance, high cold resistance and aging resistance.
1. Material: Silicone rubber
2. Belt width: 14mm or 20mm,25mm,etc;
3. Belt length: 330mm-10000mm
4. Upper surface power density: 80-120W/m
5. Power accuracy range: ± 8%
6. Insulation resistance: ≥200MΩ
7. Compressive strength: 1500v/5s
The crank case heater is used in compressors such as cabinet air conditioner, wall air conditioner and window air conditioner.
1. the air conditioner in the cold condition, the body transmission oil condensation, will affect the normal start of the unit. Heating belt can promote oil thermal, help the unit to start normally.
2. protect the compressor in the cold winter to open without damage, extend the service life. (In the cold winter, the oil condenses and cakes in the machine, causing hard friction and damaging the compressor when opened)
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
