Silicone Rubber Drainpipe Band Heater

Short Description:

The drainpipe band heater can be used for pipe line and can also be used to defrost the air duct of the chiller.The belt width of the drain pipe heater belt is 20mm,25mm,30mm and so on.The length can be customized from 1M to 20M,any other length can be customized as requirements.

Send email to us

Product Detail

Product Tags

Product Paramenters

Porduct Name	Silicone Rubber Drainpipe Band Heater
Material	Silicone rubber
Width	20mm,25mm,30mm,etc.
Heating length	0.5M-20M,or custom
Lead wire length	1000mm,or custom
Color	white,grey,red,blue,etc.
MOQ	100pcs
Resistant voltage in water	2,000V/min (normal water temperature)
Insulated resistance in water	750MOhm
Use	Drain pipe heater
Certification	CE
Package	one heater with one bag
The drainpipe band heater can be used for pipe line and can also be used to defrost the air duct of the chiller.The belt width of the drain pipe heater belt is 20mm,25mm,30mm and so on.The length can be customized from 1M to 20M,any other length can be customized as requirements. The silicone drain heater belt can be made 20W per meter,30W per meter or 40W per meter;If you need to be customized other power,pls contact us in advance.

Product Configuration

Drainpipe band heater cable is a popular and efficient pipe insulation and anti-freezing solution. The Drain line heater has a short temperature gradient, a long thermal stability period, is ideal for long-term usage, and uses a lot less heat (electric power) than electric heating.

The benefits of a drain heating cable include great thermal efficiency, low energy consumption, ease of construction and installation, simplicity of design, lack of pollution, extended service life, and more. In order to meet the typical operating requirements of heating, insulation, or anti-freezing, it works by distributing a specific amount of heat through the heat tracing media and supplementing the loss of the heat tracing pipeline by direct or indirect heat exchange.

Product Applications

After the chiller has been running for some time, the fan blades freeze and must be thawed to release the melted water from the warehouse through the drain pipe. During the drainage process, water often freezes in the drainage pipe because part of the water level is in the cold storage. The two ways to prevent this are to install heating wires in the drain pipes and heat the drain pipes to allow the water to release smoothly after frosting.