| Porduct Name | Silicone Rubber Heating Pad Manufacturer |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Shape | rectangel,suqare,round,any special shape |
| Voltage | 12V-230V |
| Power | can't be exceed 2.5W per cm² |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Insulated resistance in water | 750MOhm |
| Use | Silicone Rubber Heating Pad |
| Lead wire length | 500mm,or custom |
| 3M Adhesive | can be added |
| Approvals | CE |
|
JINGWEI HEATER is the silicone rubber heating pad manufacturer,more than 20 years on heater custom,the silicone heating pad size and shape can be customized.The silicone rubber heater can be added 3M adhesive and the temperature control.If you just want the temperature of the silicone heating mat to not exceed the set maximum use temperature, you can only add a temperature limiter, the cost will be much lower than the temperaturer control. If you control the temperature of the silicone heating mat in stages, the temperature controller will be more suitable than the temperature limit. And the silicone rubber heater we have two kind of temperature control,one is manual temperature control (temperature range is 0-80℃ and 30-150℃),the other is digital temperature control (temperature range is 0-200℃),this one can be adjusting the temperature,and the digital control can aslo be adjusted the time. |
|
Crankcase Heater
Drain Line Heater
Silicone Heating Wire
Silicone rubber heating pads can provide high watt density while maintaining flexibility. Heat can be channeled to where it is needed most.
This silicone rubber heater can improve heat transfer, accelerate preheating and reduce power requirements. Since there is little material to separate the components from the parts, heat transfer is rapid and efficient.
Glass fiber reinforced silicone rubber heater dimensional strength and flexibility. The construction of the silicone rubber heater creates a very thin heater, making it suitable for applications where space is limited. silicone rubber heating pads provide stable performance and are capable of providing more wattage than polyimide electric heaters.
1) Thermal transfer equipment;
2) Prevent condensation in motors or instrument cabinets;
3) Freeze or condensation prevention in housings containing electronic equipment, for examples: traffic signal boxes, automatic teller machines, temperature control panels, gas or liquid control valve housings
4) Composite bonding processes
5) Semiconductor process heating
6) Food processing equipment
7) Airplane engine heaters and aerospace industry
8) Drums and other vessels and viscosity control and asphalt storage
9) Medical equipment such as blood analyzers, medical respirators, test tube heaters, etc.
10) Curing of plastic laminates
11) Computer peripherals such as laser printers, duplicating machines
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
