-
China Silicone Rubber Bed Heater with Glue
The China Silicone Rubber Bed Heater specification can be customized as client’s requirements or drawing,heating pad thickness is 1.5mm(standard) and it can be added temperature limited or temperature control,the install way have 3M adhesive,spring or velcro.
-
Silicone Rubber Pad Heater with 3M Adhesive
Silicone rubber pad heater size can be customized as client’s requirements.The silicone rubber heater can be added 3M adhesive,temperature limited or temperature control.The voltage can be made from 12V-240V.
-
Custom Silicone Rubber Heating Element
The silicone rubber heating element can be customized as clients’s requirement,shape and size and power can all be customized.And the silicone rubber heating pad can be added the 3M adhesive or the spring to install.
-
Silicone Rubber Heater Pad
The Silicone Rubber Heater Pad size and shape can be customized as client’s requirements.The silicone heating pad can be added 3M adhesive and temperature limited or temperature control.
-
China Silicone Rubber Heating Pads
China Silicone Heating Pads thickness is 1.5mm,and the shape can be mad rectangle ,squar or customized shape.The silicone rubber heating pad can be added 3M adhesive and temperature limited or temperature control.
-
Silicone Rubber Heating Pad with Temperature Control
The Silicone Rubber Heating Pad size and power can be customized as requiremed,the shape can be made round,rectangle,square or any special shape.Voltage can be made 12V-240V.
-
Silicone Rubber Heating Pad for 3D Printer with 3M adhesive
1. silicone heating pad for 3D printer is designed to the actual shape dimensions, including 3D geometry to fit your equipment.
2. Silicone rubber heating mat uses moisture resistant silicone rubber heating mat to provide longer heater life.
3. silicone rubber heating pad with 3M adhesive, easy to attach and stick to your parts, by vulcanization, adhesives, or fastening parts.
-
Silicone Rubber Heating Pad Manufacturer
Silicone rubber heating pad manufacturer can be customized shapes to fit your application
Peel and stick adhesive system for easy installation
Optional insulating sponge for better efficiency
Integrated temperature sensors
Choose from higher temperature Silicone Rubber.
-
Oil Drum Silicone Rubber Heater Pad with Temperature Control
The Oil Drum Silicone Rubber Heater is made for silicone rubber,silicone rubber has the advantages of high temperature resistance, good soft invariance, strong electrical insulation and long service life,and so on,
The specs of drum heater can be customized as customer’s using plate,the standard size we have 250*1740mm,200*860mm,125*1740mm and 150*1740mm.
-
Customized Flexible Silicone Rubber Heating Pad for Digital Control
Silicone rubber heating pad with digital control can improve heat transfer and speed warm-ups where controlled heating is required in confined areas. Two circuit designs are available: etched foil or wire wound. Heaters with etched foil designed elements are available where the length or width dimension is less than 10″(254 mm). All other heaters where both the length and the width dimensions exceed 10″ (254 mm) use the wire-wound element design. Effect of power density: gentle warming is best done with 2.5 W/in2. An excellent all-purpose unit is the 5 W/in2. Rapid warm-up and high temperature are achieved with the 10 W/in2; however, the temperature must be controlled as the safe maximum operating temperature limit of 450°F (232°C) may be exceeded.
-
Flexible Heating Pad Electric Silicone Rubber Heater
Electric silicone rubber heater has good softness, can be bent R10 Angle, can be completely close contact with the heated object, can make the heat transfer to any place required, can be customized according to the user needs voltage, power, size, product shape and size. It can be used for security monitoring and communication equipment heating, new energy battery packs/chemical equipment, medical equipment/biological reagent heating, 3D printer heating, fitness equipment heating and other industries.
-
Electric Heater Silicone Rubber Flexible Hot Plate fo 3D Printer
The silicone heating pad is a soft electric heating film element composed of high temperature resistance, high thermal conductivity, good insulation performance, good strength silicone rubber, high temperature resistant fiber reinforced material and metal heating film circuit. It is composed of two pieces of glass fiber cloth and two pieces of pressed silica gel. Because it is a thin sheet product (standard thickness is 1.5 mm), it has good softness and can be completely tight contact with the heated object.