| Porduct Name | Tubular Stainless Steel Finned Heating Element |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,12.0mm |
| Fin size | 3mm or 5mm |
| Resistant voltage in water | 2,000V/min (normal water temperature) |
| Material | stainless steel 304 |
| Use | Finned Heating Element |
| Head of tube | flange or lead wire |
| Shape | straight,U shape,W shape,or custom |
| Approvals | CE / CQC |
| Size | customized as drawing or sample |
|
The stainless steel finned heating element is made of the stainless steel material,the shape and size can be customized as customer's sample or drawing,if you don't have sample,you can measure the heater length and shown on the picture,we can also be produced and quote. The finned heating element shape we have straight,U shape,W shape and any special shape,JINGWEI heater is a manufacturer and our heater can be customized ,we don't have any standard heater specs;So if you have any custom heating element,you can contact us. |
|
Defrost Heater
Oven Heater
Immersion Heater
The stainless steel finned heating element uses a strong tubular component as the structural basis. The fin material is continuously spirally wound around the surface of the element to increase the convective surface area for air and non-corrosive gas heating. Fin spacing and size were tested and selected to optimize performance. The steel fin unit is then furnace brazed to bond the fins to the sheath to improve electrical conductivity. This allows a higher wattage level to be achieved in the same flow area and produces a lower sheath temperature, extending the service life of the finned heater element. For higher temperature or more corrosive applications, stainless steel fins can be securely wound around the alloy sheath. Application conditions such as vibration and toxic/flammable media should be considered when installing finned heating elements. Protective coatings can be used for fin heating elements in mild corrosion or high humidity applications.
1. STAINLESS STEEL MATERIAL: Made of high quality stainless steel, resistance, durable in use;
2. UNIFORM HEATING EFFECT: Uniform heating, good thermal performance, high thermal efficiency;
3. NOT EASY TO AGE: High temperature resistant, not easy to age, long service life;
4. FAST HEAT CONDUCTION: Stable performance, fast heat conduction, good heating effect;
5. WIDE APPLICATIONS: Widely used in many kinds of ovens, baking rooms, heat preservation, air conditioning equipment, food, food appliances;
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
