Tubular Strip Finned Heating Element

Short Description:

Tubular Strip Finned Heating Elements are used for forced convection heating, air or gas heating heating systems. Finned tubular heaters/heating elements are customized to meet your specific application needs.

Send email to us

Product Detail

Product Tags

Product Paramenters

Porduct Name	Tubular Strip Finned Heating Element
Humidity State Insulation Resistance	≥200MΩ
After Humid Heat Test Insulation Resistance	≥30MΩ
Humidity State Leakage Current	≤0.1mA
Surface Load	≤3.5W/cm2
Tube diameter	6.5mm,8.0mm,etc
Shape	Straight,U shape,W shape,or customized
Resistant voltage	2,000V/min
Insulated resistance	750MOhm
Use	Finned Heating Element
Terminal	Rubber head,flange
Length	Customized
Approvals	CE, CQC
The shape of finned heating element we usually made by straight,U shape,W shape,we can also customized some special shapes as required.Most customer's is choosed the tube head by flange,if you used the finned heating elements on unit cooler or other defrsoting equipments,maybe you can choosed the head seal by silicone rubber,this seal way has the best waterproof.

Product Configuration

Electric Finned Heating Tube Finned Tubular Heater is designed for use in natural and forced convection space heating. Fin material is continuously spiral wound tightly onto the element surface to increase the convective surface area for air and non-corrosive gas heating. Fin spacing and size have been tested and selected to optimize performance. Steel finned units are then furnace brazed, bonding the fins to the sheath to increase conductive efficiency. This allows higher wattage levels to be achieved in the same flow area and produces lower sheath temperatures prolonging heater life.

Shape Choose

Straight

U shape

W shape

Product Applications

Electric finned heating tube finned tubular heater are used for forced convection heating, air or gas heating heating systems. Finned tubular heaters/heating elements are customized to meet your specific application needs.