Product Paramenters
| Porduct Name | Water and Oil Tank Immersion Heater |
| Humidity State Insulation Resistance | ≥200MΩ |
| After Humid Heat Test Insulation Resistance | ≥30MΩ |
| Humidity State Leakage Current | ≤0.1mA |
| Surface Load | ≤3.5W/cm2 |
| Tube diameter | 6.5mm,8.0mm,10.7mm,etc. |
| Shape | straight,U shape,W shape,etc. |
| Resistant voltage | 2,000V/min |
| Insulated resistance in water | 750MOhm |
| Use | Immersion Heating Element |
| Tube length | 300-7500mm |
| Shape | customized |
| Approvals | CE/ CQC |
| Terminal type | Customized |
|
The Tubular Water Immersion Heater material we have stainless steel 201 and stainless steel 304,the flange size have DN40 and DN50,power and tube length can be custoized as requirements. |
|
Product Configuration
Heating Element with Flange's basic construction consists of a computer-desianed helical coil of 80% Nickel 20% chromium allonresistance wire fusion welded to the nickel-coated steel terminal cold pins. This assembly is precisely stretched and centered inthe element metal sheath, which is then filed with Grade "A" Magnesium Oxide powder (MgO). The filed tube is then compactecby a rol reduction mill into a solid mass, permanently stablizing the coil in the center of the tube while providing excellent heattransfer and dielectric strength between the coil and the sheath.
Flange lmmersion Tubular Heaters are called flange immersion heaters, which are designed for usein drums, tanks and pressurized vessels to heat both gases and liauids, They consist of multiple oneto several U shape tubular heaters formed into a hairpin shape and brazed to flanges.
Product Features
Stainless Steel Water Electric Flange lmmersion Tubular Heaters are constructed using a copper, steel, stainless steelor lincoloy sheath material. A MgO insulation is used to extend the life of the heater as well as allow for exceptional heat transferand dielectric strength. The use of a slicone resin seal allows for moisture resistant. A wide range of terminal types and diametersare available.
Water Electric Flange lmmersion Tubular Heaters are widely used to heat liquids, air or metals as areliable, economical. and versatle way, which can be used in a large variety of applications, including those with size restrictionsfor small spaces. They allow for even heat distribution as well as a high dielectric strength. Tubular heaters can be formed into avariety of patterns.
Production Process
Service
Develop
received the products specs,drawing,and picture
Quotes
the manager feedback the inquiry in 1-2hours and send quotation
Samples
Free samples will be sent for check products quality before bluk production
Production
confirm products specification again,then arrange the production
Order
Place order once you confirmed samples
Testing
Our QC team will be checked the products quality before delivery
Packing
packing products as required
Loading
Loading ready productsto client’s container
Receiving
Received you order
Why Choose Us
• 25 years exporting & 20 years manufacturing experience
• Factory covers an area of about 8000m²
• In 2021，all kinds of advanced production equipment had been replaced, including powder filling machine, pipe shrinking machine, pipe bending equipment, etc.,
• the average daily output is about 15000pcs
• Different Cooperative customer
• Customization depend on your requirement
Certificate
Related Products
Aluminum Foil Heater
Oven Heating Element
Fin Heating Element
Silicone Heating Pad
Crankcase Heater
Drain Line Heater
Factory Picture
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
Contacts: Amiee Zhang
Email: info@benoelectric.com
Wechat: +86 15268490327
WhatsApp: +86 15268490327
Skype: amiee19940314
