| Porduct Name | Wholesale Silicone Heating Belt Compressor Crankcase Heater |
| Material | silicone rubber |
| Power | customized |
| Voltage | 110V-240V |
| Belt width | 14mm,20mm,25mm,30mm,etc. |
| Belt length | customized |
| Lead wire length | 1000mm,or custom |
| Material of lead wire | silicone rubber or fiberglass wire |
| Min thickness | 0.5mm |
| Withstand voltage | ＞5KV |
| Terminal type | 6.3mm or 4.8mm,or customized |
| Certification | CE |
|
1. The compressor crankcase heater is mainly used 14mm and 20mm two width,if you need the wider width,we can also be customized. 2. The crank case heater length don't have standard,we are the factory,so the length and power/voltage can be customized,the silicone heater can also be added the terminal; 3. Change the power and voltage,the price of silicone crankcase heater will be same,our heater price is based on the heater length,width,lead wire length and quantity. If you have any doubts on the heater,you can contact us directly! |
|
Silicone rubber heating belt/heating pad has good waterproof performance, wear-resisting pressure and aging resistance.
1. Heating, mixing and heat preservation of pipes, tanks, towers and tanks of industrial equipment in humid and non-explosive gas occasions can be directly wound on the surface of the heated part when used.
2, refrigeration protection and air-conditioning compressor, motor, submersible pump and other equipment auxiliary heating,
3, medical equipment such as blood analyzer, test tube heater, medical clothing, belt compensation heat and so on. The product is mainly composed of alloy electric heating wire and silicone rubber high temperature insulation cloth, it heats fast, uniform temperature, high thermal efficiency, good toughness, in line with the United States UL 94-V0 fire resistance standard, its easy to use, waterproof, aging life of up to five years.
Installation method: First wrap the silicone heating belt around the water pipe, you can add a temperature control switch constant temperature (or adjustable temperature control) after installation, wrap aluminum foil tape to fix and keep warm, plug in the power supply. (Recommend buying a thermostat)
Silicone rubber pipe heating belt waterproof performance is good, can be used for:
1. The heating tracing and insulation of the pipeline tank and tower tank of industrial equipment in the case of humid non-explosive gas can be directly wound on the surface of the heated part when used.
2. Refrigeration protection and air conditioning compressor motor submersible pump and other equipment auxiliary heating.
3. silicone electric heating elements, with more level the product is mainly composed of alloy electric heating wire and silicon rubber, it heating fast temperature uniform thermal efficiency high toughness, easy to use long life, not easy to aging.
Note when using:
**** 1. When installing, the silicone rubber plane side of the heat belt should be close to the surface of the medium pipeline tank and fixed with aluminum tape.
**** 2. In order to reduce heat loss, a thermal insulation layer should be added to the outside of the electric tropical zone.
**** 3. Overlapping winding installation is strictly prohibited to prevent overheating damage.
We can be customized according to customer's requirements.
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.
